ADP-DECK BRITE - 20 Gallon Mix ADP-DB-20

Search

Shopping Cart:
now in your cart 0 items

Product Categories


Welcome
ADP-Mold Shield
ADP-Mold Zap
ADP-Safe Strip
ADP-Wood Renu
ADP-Crete Shield
ADP-Wood Shield
ADP-Green Clean
ADP-Mold-B-Gone
ADP-Natures Touch
ADP-House Wash
ADP-E-Z Clean
ADP-Wood Brightener
ADP-Wood Stripper
ADP-Oxy Total Care
ADP-Bee Stop

Information

Terms of Service
Privacy Policy

ADP-DECK BRITE - 20 Gallon Mix ADP-DB-20 Product Overview Product Overview Directions of Use ---- MSDS DESCRIPTION ADP-DECK BRITE is a powdered concentrate that is mixed with water. It is an environmentally friendly product that safely brightens and restores the natural beauty of exterior wood, removes tannin and rust stains and is recommended for use on all species of wood, including redwood. ADP-DECK BRITE will not harm wood fibers, grass or most plants when used properly. USES ADP-DECK BRITE removes tannin, rust, and fungi stains from horizontal and vertical wood surfaces.ADP- DECK BRITE is used as a neutralizer and brightener for all wood species that have been cleaned with ADP-DECKSTRIP or ADP-DECK WASH. Note: ADP-DECK BRITE is not formulated to remove intact paint, stain, or clear finishes and may dull painted and metal surfaces if not quickly rinsed. BENEFITS ● Restores the rich look of new wood. ● Won’t harm most plants or shrubbery. ● Will restore redwood or cedar that has been darkened in the cleaning process to its original color. DIRECTIONS FOR USE Step 1: MIX: Use 8 ounces of ADP-DECK BRITE powdered concentrate with each gallon of water. Step 2: APPLY: Thoroughly wet all surrounding vegetation with water before application. Apply ADP-DECK BRITE solution to wood with sprayer, brush, or mop. Let solution stand for 3-5 minutes, keeping wet with additional solution if necessary. On vertical surfaces begin applying solution at the bottom and work to the top. Application may be repeated if desired. Step 3: RINSE: Rinse wood and all surrounding vegetation thoroughly by flooding area with water from garden hose. Rinse vertical surfaces from bottom up to avoid streaking. COVERAGE 100 - 200 sq. ft. per gallon, depending on wood porosity, when mixed at the recommended dilution rate of 8 ounces of ADP-DECK BRITE to 1gallon of water. CAUTIONS Contains oxalic acid. Do not mix ADP-DECK BRITE with chlorine bleach or other chemicals. Store in original container only. Keep from freezing. The use of chemical splash goggles and rubber gloves is recommended when handling this product.Accumulation of product on ladders, scaffolding, decks, etc. may result in a slippery surface. FIRST AID: In case of eye contact, flush immediately with water for 15 minutes. Get prompt medical attention. In case of skin contact, rinse with water. If swallowed, give milk or water, do not induce vomiting. Call physician. LIMITED WARRANTY AMERICAN DECK PRODUCTS warrants this product to be free from defects for six months from date of purchase. Any claim must be made in writing, accompanied by proof of purchase. We will only be obligated to replace the product or refund the purchase price. There is no other express warranty. AMERICAN DECK PRODUCTS shall not be liable for incidental or consequential damages resulting from any breach of this warranty and fitness for use. Some states do not allow the exclusion of incidental or consequential damages, so the above warranty may not apply to you. This warranty gives you specific legal rights. You may also have other rights, which vary, from state to state. PACKAGING ADP-DECK BRITE is available in1.00lb, 2.50 lb., and 10 lb. recyclable plastic containers. 1-lb. container makes 2-gallons 2.5-lb. container makes 5-gallons 10-lb. container makes 20-gallons TRANSPORT AND STORAGE ADP-DECK BRITE is not considered hazardous under Department of Transportation regulations. Store in cool, dry area. Keep from freezing.
Item Number	6
Weight	10.00
Price	$139.00
Quantity
More Images

Copyright © , American Deck Products. All rights reserved